Home
Grade L Chain
DIN 766 Chain
Engine Anodes
Hull Anodes
Shaft Anodes
Rudder Anodes
Miscellaneous Anodes
Outboard & Outdrive Anodes
About Us
Contact Us
Barry Clark Marine. Marine electrical, electrical WOF, charging systems, steering systems, fuel systems, batteries, instruments, engine wiring, alternators,
Paul Dobbyn Marine Interiors - Marine Team, marine interiors, teak decks, recaulking, super yachts, pleasure boats  

Grade L Windlass Chain

Grade L is low carbon steel chain specifically manufactured to Australian Standard AS2321-2006. Used for anchoring and mooring applications, Grade L calibrated short-link design ensures proper fit for most Australian windlasses. Hot dip galvanised for best protection against corrosion and abrasion. Check manufacturers specifications prior to purchase.

Finish: Hot Dip Galvanised
Packaging: Full & Half Drums, and Pails

Trade Size
mm
Wire Diameter
mm
Inside Dimensions
Length/mm|Width/mm
Work Load Limit
pound-force
6 6 18 7.5 1000
8 8 24 10 1800
10 10 30 12.5 2800
13 13 39 16.3 4500

Packaging

Trade Size
mm
Part ID Plastic Pail
Kg|Lbs|Length / m
6 CHGL6X60 48 106 60
8 CHGL8X34 48 106 34
10 CHGL10X22 50 110 22
13 CHGL13X13 50 110 13
Trade Size
mm
Part ID Half Drum
Kg|Lbs|Length / m
6 CHGL6X157 126 276 157
8 CHGL8X88 125 275 88
10 CHGL10X55 125 276 55
13 CHGL13X32 124 272 32
Trade Size
mm
Part ID Full Drum
Kg|Lbs|Length / m
6 CHGL6X315 252 554 315
8 CHGL8X175 249 547 175
10 CHGL10X110 251 552 110
13 CHGL13X64 247 543 64


Warning: Working Load Limit must not be exceeded. Not to be used for lifting or hoisting applications.
Specializing in Super Yachts, commercial vessels, barges, tugs, dredges, Pleasure Boats, boat marinas, salt water, fresh water, brackish water.

Website by Netgraphix

Copyright © Chalmers Marine. All Rights Reserved.